6 Proven Steps To Fix Windows 10 blue screen error. (Stop Code: PAGE FAULT IN NON PAGED AREA

 Before we start we should know the causes behind this error, There are many situation
Unlike many other blue screen errors this one is commonly associated with hardware components in fact in 90% of the cases the blue screen error. Usually occurs due to damage or faulty RAM but in some situations several other factors can cause this issue.
 

 

Below factors can cause this error.

1. Corrupt system files
2 Incompatible Software Or Hardware.
3. Outdated Drivers.
4. Bad sectors on your hard drive
5. Persistence of malware on your system.
Since the page fault in non-page area can occur due to hardware and software, You will have to try to
different troubleshoot to fix this issue.

METHOD 1. UPDATE DISPLAY DRIVER
 

The first solution would be to update your driver, Since driver play vital role for running system smoothly. Faulty device drivers are one of the most common reasons of "page fault in non-paged area". So before moving to advanced steps we should try this one.

1 Go to "Device Manager" by "Windows Search" and look for "Display Adapters".

 

 

2. Right click on your display driver and click on "Update" The "Search automatically for drivers" and make sure your are connected to internet .
3. If you get like this message "The best driver for your device are already installed" the you need to
go same option as "Display driver" right click on it and click on "Update Driver" now choose "Search automatically for driver".
4. Click on "Browse my computer for drivers" the "Let me pick from a list of available driver on my computer".
5. Now click on "Update driver" if you can not see it , Chose "Microsoft basic Driver" and restart your system.

 

METHOD 2. RUN MEMORY DIAGNOSTIC TOOL. 

Considering faulty RAM is the primary reason behind the stop code page fault in non-paged area
error , You can diagnose the RAM using windows built -in memory diagnostic tool. 

This will check all the bad sectors on you RAM and will try to fix the issue. You need to restart your system . After restarting you will see the blue screen , But don't worry this is happening since we started this memory diagnostic tool. 

1. Go to "Search Bar" and type "Memory diagnostic" and click on "Windows Memory Diagnostic".

 

2. Now choose "Restart Now and check for the problem (Recommended)" and your system will restart .

3. Let this run it will automatically scan RAM and will repair bad sectors. In case RAM is corrupted or damaged you have to replace with new RAM and check if problem is fixed , If not follow next fix.

METHOD 3. DISABLE AUTOMATICALLY MANAGE PAGING FILE SIZE.

Windows automatically manage paging file size by default , It can trigger unexpected and can lead to this issue. In this situation you should disable automatically manage paging file size in order to fix this problem on your windows. 

1. Go to "Windows Search Bar" and type "view advanced system settings" and click on it.

 

2. Now click on "Setting" under "Performance" Tab.

 

3. Click on "Advance" and then "Change" the click on "Change". 

4. Uncheck the option "Automatically manage paging file size for all drivers"  hit "OK".

5. Now you need to restart your system and check if problem resolved or not. If still facing same issue your need to follow next method. 

METHOD 4. RUN DISK CHECKER .

Corrupted or faulty hardware can be the reason behind the blue screen. If you recently did changes
or replace your hardware , then the problem will be in your hardware.
You will have to replace with compatible hardware , You can remove hardware one by one and keep checking.
If you have identified  that your hardware is OK, then you can run some commands to fix this
blue screen PAGE FAULT IN NON-PAGED AREA.

1. Go to "Windows Search Bar" and type "CMD" the right click on "command Prompt" then select "run as administrator". 

2. Type "chkdsk /f /r  and press enter key.

3. Press "Y" on your keyboard and restart your system.

 

METHOD 5. DISABLE THIRD PARTY ANTI-VIRUS PROGRAM TEMPORARILY.

The third party antivirus could be the reason behind the problem. In order to solve this problem,
you should disable the antivirus application on temporarily and check the problem.
If the problem persists then enable the antivirus application again. And if the problem is solved,
the the antivirus is an issue.
 

METHOD 6. CHECK FOR WINDOWS UPDATE.

Keeping your system up to date is very important for every windows user since updated System enhances security and keep you protected from hacker attacks. 
You must update your system whenever you get update from Microsoft in order to keep your system safe from virus and attacks.

1. Go to "Windows Search Bar" and type "Check For Update" and Click  on "Check for update" . 

2. Make sure your system is up to date as above images shown.

CLOSING WORDS.

If nothing worked , then you need to install fresh windows , It you think your hardware is working fine and no issue with hardware.